Foam Kit Solutions: The Affordable Spray Foam Kit is Here



Foam Kit Solutions Ohio Spray Foam Insider


Foam Kit Solutions offers an astounding array of spray foam kits for every need. With 17 years of experience in the spray foam industry, Todd Hensel, owner of Foam Kit Solutions, has gained valuable experience and the technical insight into the importance using the right products for the job from a contractor’s perspective. In addition to spray foam kits for residential and commercial uses, Foam Kit Solutions offers spray foam kits for roofs and vehicles! It truly is a one-stop-shop for spray foam kits.

Foam Kit Solution’s mission is to provide the best possible value while maintaining the best quality products. Moreover, they make buying spray foam kits and many other products easy and affordable. Contractor pricing is available and Foam Kit Solution’s on-line store makes shopping fast, easy and convenient. You’ll also find educational tech tips and detailed product information.


The Following are Just Two of the Many Spray Foam Kits Available:


Handi-Foam 605 E-84 Class 1 Closed Cell Insulation Kit

This two-component, low pressure spray polyurethane foams are packaged with an A-component and B-component cylinder. Each II-605 kit is equipped with a 15′ long hose. It also included is an 8 pack of nozzles (3 fan & 5 cone nozzles). The Handi-Gun and nozzles are solvent resistant and can be cleaned with approved solvents.


Spray Foam Kit Solutions Ohio Spray Foam Insider

USES R-VALUE YIELD
Common insulation and sealing applications: Rim joists, band joists, attic critical seals,
wall cavities, exterior HVAC ductwork, ceiling, floors, underside of bath tubs.
6.8 per inch 605 Sq. Ft./1-inch thickness
Or
605 Board Feet

The E-84 Class 1 foam formulation is specially formulated for flame retardancy and conforms to the requirements of the ASTM E-84 flame and smoke spread requirements to be rated as a Class 1 building material. It is tack-free in less than 60 seconds, can be cut in 2-5 minutes and cures within 1 hour.



Handi-Foam 605 Quick Cure Closed Cell Insulation Kit

Each II-605 kit is equipped 15' long hose and an 8 pack of nozzles (4 fan & 4 cone nozzles). The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.


Spray Foam Kit Solutions Ohio Spray Foam Insider

USES R-VALUE YIELD
Common insulation and sealing applications: Rim joists, band joists, attic critical seals,
wall cavities, exterior HVAC ductwork, ceiling, floors, underside of bath tubs, mold and
asbestos abatement, theatrical set design and cold storage.
6.0 per inch 605 Sq. Ft./1-inch thickness
Or
605 Board Feet

Other Spray Foam Kits available include:

  • Handi-Foam 205 E-84 Class 1 Closed Cell Insulation Kit
  • Handi Flow 2-44 Channel Fill Pour-in-Place Foam Kit
  • Handi Flow 2-15 Channel Pour-in-Place Foam Kit
  • Handi Flow 2-43 Slow Rise Closed Cell Insulation Kit
  • Handi Flow 2-13 Slow Rise Closed Cell Insulation Kit
  • Handi Foam 1350 Sound Barrier Open Cell Spray Foam Kit
  • Handi Foam 605 Commercial Vehicle Spray Foam Kit
  • Handi Foam 205 Commercial Vehicle Spray Foam Kit
  • Handi Foam 425 SPF Roof Patch 2.5 lb. Closed Cell Kit
  • Handi Foam 145 SPF Roof Patch 2.5 lb. Closed Cell Kit

Spray foam kits are always handy for all those small or hard-to-reach areas. They go where traditional spray foam equipment cannot go, so it’s always a great idea to keep one or two in your spray foam rig.

Visit Foam Kit Solutions to see their vast array of products at:

Foamkitsolutions.com

Located in Massillon, Ohio
Phone 330-837-7700