Don’t Forget to Winterize Your Spray Rig for the Season
- Christmas Tree
- Christmas lights
- Christmas Presents…
….. but don’t forget to winterize your spray rig for the season. By doing this, it will extend the life of your rig and minimize the degradation of o-rings and other components.
The following instructions provide contractors with a proper method to shut down spray rigs for extended storage using products from Versum Materials. These instructions should not be used in lieu of specific instructions from equipment manufacturers.
- Circulate and flush A-side with Dynasolve Iso-Neutralizer if liquid isocyanate is present.
- Flush A and B sides with Dynasolve CU-6. CU-6 may be strained and reused if additional flushes are desired. Mild heating will produce faster results.
- Flush system with Dyna-Lube 1-3 times to remove CU-6.
- Pump Dyna-Lube into the system until it fills all areas of the unit.
- Store unit, preferably in a cool, dry place.
If you have any questions, please contact Alicia Anderson at alicia.anderson@emdgroup.com
Happy Holidays from EMD Performance Materials!
Visit us at website at https://www.versummaterials.com/…/spray-foam-insulation/