20 ft. Spray Foam Trailer with NEW PMC PH-2 Proportioner

Code RL

2021 Custom Built 20′ V-Nose Spray Foam Rig; Pro Series 2-Compartment

Just installed NEW PMC PH-2 proportioner (Electric/Hydraulic) Single Phase

40 KW Diesel plus Shore Power

This rig also has a brand new (1 month in service)

25′ hose whip and brand new 150” of hose sheath just installed

1 Big Foot 8,000 lb. electric/hydraulic trailer jack

210’ heated spray hose with brand new scuff jacket (Blue)

2 Graco T-3 pneumatic 3:1 material transfer pumps

1 Graco Fusion ProConnect Spray Gun

1 CAS Rotary Screw Air Compressor 7.5 hp, 1-phase, 24 cfm @ 150 psi and 30-gallon horizontal air holding tank

1 BEKO Drypoint RA 30 cfm high temperature refrigerated air dryer

1 40 KW 1-Phase Diesel Generator with Digital Control Panel and Electric Start

36-gallon fuel tank and exterior filler supply (has 3,850 run time hours on engine)

1 engine start battery and trickle charge system

1 Shore power switch system with 150’ of #2 /4 SO power cable with a 200-amp generator to shore

4 Drawer Workpro toolbox and Husky 2 door storage cabinet

Customizations: 

Separation wall added in between the engine/compressor area for some noise separation from the main working area.

Hose hatch in the rear of the trailer

Ramp door for loading and unloading barrels.

Gas propane heat

Exterior AC unit

Trailer has external power and light plugs.

This rig has been well maintained. The engine and compressor maintained every 500 hours and have serviced the trailer bi-annually since bringing into service.

This is a great, heavy-duty unit that will pump foam day in and day out.

Feel free to ask for videos or come out to see it working for yourself.

Motivated Seller

Location: Wyoming

Please call 330-209-9019 for more information