------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

WARRANTY


Polyurethane Machinery Corporation (hereinafter “PMC”) provides this LIMITED WARRANTY (hereinafter “Warranty”) to the original purchaser (hereinafter “Customer”) covering this equipment and the original PMC manufactured accessories delivered with the equipment (hereinafter “Product”) against defects in material or workmanship of the Product (hereinafter “Defect” or “Defective”) for a period of one (1) year from the date of first purchase as shown on the original PMC invoice (hereinafter “Warranty Period”).


If during the Warranty Period under normal use, the Product is suspected by Customer to be Defective in material or workmanship, it is Customer’s responsibility to contact PMC and return the Product to PMC as directed by PMC, freight prepaid. If PMC determines that the Product is Defective and that such Defect is covered by this Warranty, PMC will credit Customer for the reasonable freight charges incurred by Customer in returning the Defective Product to PMC, and PMC (or its authorized agent) will, at PMC’s option, repair or replace the Product, subject to the following:


Original Invoice: The original invoice must be kept as proof of the date of first sale and the Product serial number. The Warranty does not cover any Product if the Original Invoice appears to have been modified or altered, or when the serial number on the Product appears to have been altered or defaced.


Product Maintenance: It is the Customer’s responsibility to maintain the Product properly. See your maintenance schedule and owner’s manual for details. The Warranty does not cover an improperly maintained Product.


Non-PMC Components and Accessories: Non-PMC manufactured components and accessories that are used in the operation of the Product are not covered by this Warranty. Such components and accessories shall be subject to the warranty offered to the Customer, if any, by the original manufacturer of such component or accessory.


Other Warranty Exclusions: The Warranty does not cover any Product that PMC determines has been damaged or fails to operate properly due to misuse, negligence, abuse, carelessness, neglect, or accident. By way of example only, this includes:


 Normal wear and tear.
 Improper or unauthorized installation, repair, alteration, adjustment or modification of the Product.
 Use of heating devices, pumping equipment, dispensers, or other parts or accessories with the Product that have not been approved or manufactured by PMC.
 Failure to follow the operating instructions and recommendations provided by PMC.
 Cosmetic damage.
 Fire, flood, “acts of God,” or other contingencies beyond the control of PMC.

 

 

1

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

WARRANTY


THE WARRANTY DESCRIBED HEREIN IS THE EXCLUSIVE REMEDY FOR THE CUSTOMER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED. TO THE FULLEST EXTENT PERMITTED BY LAW, PMC SHALL NOT BE RESPONSIBLE, WHETHER BASED IN CONTRACT, TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE), WARRANTY OR ANY OTHER LEGAL OR EQUITABLE GROUNDS, FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, LOST PROFITS, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, WHETHER TO PERSON OR PROPERTY, ARISING FROM OR RELATING TO THE PRODUCT, EVEN IF PMC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES.


Non-Warranty Service by PMC
: If PMC determines that the suspected Defect of the Product is not covered by this Warranty, disposition of the Product will be made pursuant to the terms and conditions of PMC’s written estimate on a time and materials basis.


Continuing Warranty for Products Repaired or Replaced under Warranty: Following the repair or replacement of a Product covered by this Warranty, such Product will continue to be subject to the original Warranty for the remainder of original Warranty Period or for three (3) months from the repair or replacement date, whichever is longer.


No Rights Implied: Nothing in the sale, lease or rental of any Product by PMC shall be construed to grant any right, interest or license in or under any patent, trademark, copyright, trade secret or other proprietary right or material owned by anyone; nor does PMC encourage the infringement of same.

Exclusive Warranty: This writing is the final, complete, and exclusive expression of the Warranty covering the Product. Any statements made by PMC, its employees or agents that differ from the terms of this Warranty shall have no effect. It is expressly understood that Customer’s acceptance of this Warranty, by performance or otherwise, is upon and subject solely to the terms and conditions hereof, and any additional or different terms and conditions proposed or expressed by Customer or anyone, whether in writing or otherwise, are null and void unless specifically agreed to in writing by an Officer of PMC.

 

 

2

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

SAFETY AND HANDLING


This chapter contains important information on the safety, handling, and use of your PH Series Console.

 

PMC PH Series Spray Foam Machine A2

Before installing the PH Series Proportioner and start-up, carefully read all the technical and safety documentation included in this manual. Pay special attention to the information in order to know and understand the operation and the conditions of use of the PH Series Proportioner. All of the information is aimed at improving user safety and avoiding possible breakdowns from the incorrect use of the PH Series Proportioner.


Always disconnect the console from the main power source before opening the console.


WARNING! Symbol is presented in front of information to alert of a situation that might cause serious injuries if the instructions are not followed.

CAUTION! Symbol is presented in front of information that indicates how to avoid damage to the Proportioner or how to avoid a situation that could cause minor injuries.

NOTE! Symbol is presented in front of relevant information of a procedure being carried out.

Careful study of this manual will enable the operator to understand the characteristics of the PH Series Console and the operating procedures. By following the instructions and recommendations contained herein, you will reduce the potential risk of accidents in the installation, use, or maintenance of the PH Series Console. You will also provide a better opportunity for increased output, incident-free operation for a longer time, and the possibility of detecting and resolving problems quickly and simply.

Keep this Operations Manual for future consultation of useful information at all times. If you lose this manual, ask for a new copy from your PMC authorized distributor or go online at our web site (www.polymac-usa.com).

When working with the PH Series Console, it is recommended that the operator wear suitable clothing and elements of personal protection, including, without limitation, gloves, protective goggles, safety footwear and face masks. Use breathing equipment when working with the PH Series Proportioner in enclosed spaces or in areas with insufficient ventilation. The introduction and follow-up of safety measures must not be limited to those described in this manual. Before starting up the PH Series Proportioner, a comprehensive analysis must be made of the risks derived from the products to be dispensed, the type of application and the working environment.

 

 

3

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

SAFETY AND HANDLING

 

PMC PH Series Spray Foam Machine A3


To prevent possible injury caused by incorrect handling of the raw materials and solvents used in the process, carefully read the Material Safety Data Sheet (MSDS) provided by your supplier.
Deal with waste caused according to current regulations. Pour éviter toute blessure causée par une mauvaise manipulation des matières premières et les solvants utilisés dans le processus, veuillez lire attentivement la fiche signalétique (MSDS) fournies par votre fournisseur.

 

PMC PH Series Spray Foam Machine A4


To avoid damage caused by the impact of pressurized fluids, do not open any connection or perform maintenance work on the components subject to pressure until the pressure has been completely eliminated. Pour éviter les dommages causés par l'impact des fluides sous pression, ne pas ouvrir un lien ou d'effectuer des travaux d'entretien sur les éléments soumis à la pression jusqu'à ce que la pression a été complètement éliminé.

 

PMC PH Series Spray Foam Machine A5PMC PH Series Spray Foam Machine A6

Use suitable protection when operating, maintaining or being present in the area where the equipment is functioning. This includes, but is not limited to, the use of protective goggles, gloves, shoes and safety clothing and breathing equipment. Utiliser une protection appropriée utilisation, d'entretien ou d'être présents dans la région où le matériel fonctionne. Cela inclut, mais n'est pas limité à, l'utilisation de lunettes de protection, gants, chaussures et vêtements de sécurité et un équipement respiratoire

 

PMC PH Series Spray Foam Machine A7

The equipment includes components that reach high temperatures and can cause burns. Hot parts of the equipment must NOT be handled or touched until they have cooled completely. L'équipement comprend des éléments qui atteignent des températures élevées et peuvent provoquer des brûlures. Les parties chaudes de l'équipement ne doit pas être manipulé ou touché jusqu'à ce qu'ils aient complètement refroidi.

 

PMC PH Series Spray Foam Machine A8

To prevent serious injury through crushing or amputation, do not work with the equipment without the safety guards installed on the moving parts. Make sure that all the safety guards are correctly reinstalled at the end of the repair or maintenance work of the equipment. L'équipement comprend des éléments qui atteignent des températures élevées et peuvent provoquer des brûlures. Les parties chaudes de l'équipement ne doit pas être manipulé ou touché jusqu'à ce qu'ils aient complètement refroidi.

 

PMC PH Series Spray Foam Machine A9PMC PH Series Spray Foam Machine A10

 

 

 

 

 

4

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 PHASE


Component Identification

 


Front Panel (ALL CONSOLES)

 

PMC PH Series Spray Foam Machine A11

PMC PH Series Spray Foam Machine A12

 

 

 

5

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

 

 

 

6

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 


Bottom Plate (PH-25 & PHX-25 ONLY)

 

PMC PH Series Spray Foam Machine A14

PMC PH Series Spray Foam Machine A15

 

 

 

7

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

PMC PH Series Spray Foam Machine A16

PMC PH Series Spray Foam Machine A17

 

 

 

8

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

PMC PH Series Spray Foam Machine A18

*Older consoles will have EatonTM contactors and newer consoles with have Carlo GavazziTM contactors.

Note the manufacturer before ordering because they are not direct replacements for each other.

 

9

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 


Bottom Plate (PH-40 & PHX-40 ONLY)

 

 

 

 

 

 

10

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

 

 

 

 

 

11

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

 

 

 

12

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

Point to Point Diagrams (PH-25 & PHX-25 ONLY)

 

Incoming Power

 

PMC PH Series Spray Foam Machine A19

 

 

 

13

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Heater Circuit

 

PMC PH Series Spray Foam Machine A20

 

 

14

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Motor Circuit

 

PMC PH Series Spray Foam Machine A21

 

 

15

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

Point to Point Diagrams (PH-40 & PHX-40 ONLY)

 

Incoming Power

 

PMC PH Series Spray Foam Machine A22

 

 

16

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Heater Circuit

 

 

PMC PH Series Spray Foam Machine A23

 

 

17

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Motor Circuit

 

PMC PH Series Spray Foam Machine A24

 

 

18

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Point to Point Diagrams (ALL CONSOLES)

 

 

24 VDC Power Circuit

 

 

PMC PH Series Spray Foam Machine A25

 

 

19

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

220 VAC – 1 Phase

 

Pump Circuit

 

PMC PH Series Spray Foam Machine A26

 

 

 

20

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

Pressure Balance Control Circuit

 

PMC PH Series Spray Foam Machine A27

*See 24VDC Power Circuit (Pg. 19)

 

21

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

Ladder Diagrams (ALL CONSOLES)

 

Incoming Power

 

PMC PH Series Spray Foam Machine A28

 

22

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

 

Heater Circuit

 

PMC PH Series Spray Foam Machine A29

*See 24 VDC Power Circuit (Pg. 25) for complete MCR wire connections
**PH-40 & PHX-40 machines include two additional hose tap terminals for hose lengths of 360 and 410 feet.

 

23

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

Motor Circuit

 

PMC PH Series Spray Foam Machine A30

 

 

 

24

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

24 VDC Power Circuit

 

PMC PH Series Spray Foam Machine A31

*See Pump Circuit (Pg. 26)

 

 

25

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 


Pump Circuit

 

PMC PH Series Spray Foam Machine A32

*See Pressure Balance Control Circuit (Pg. 27) for complete 1 CR wire connections
**When the cycle counter switch is turned “ON”, the NC switch opens and the NO switch closes simultaneously

 

 

26

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

220 VAC – 1 Phase

 

Pressure Balance Control Circuit

 

PMC PH Series Spray Foam Machine A33

*See Pump Circuit (Pg. 26)

 

 

27

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

Continue Here

 

 


Spray Foam Equipment Insider, your number one advertising and marketing resource. Proudly serving all 50 states and Canada:

FIND A CONTRACTOR
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming